Here's my hardware I'm using:
chipset: Z270 (Asus Mark 1 MB)
cpu: 7700K (running at default specs)
I have two m2 socket 3 w/ M Key, both are in PCIe mode
One has the intel optane 32GB ssd running at x2
It's accelerating an Sata Intel 168GB SSDSC2CT180CGN with firmware 300i which contain
OS Windows 10 Enterprise version 1703 completely updated.
The other M2 socket contain a Kingston HyperX 240GB ssd in PCIe mode running at x4
Anyhow basically everything is setup as instructed for optane acceleration.
Prior to enabling the optane the windows event logs has none of these errors which I'm about to describe.
Once it's all enabled and the system rebooted, Everything appears to be functioning as expected except for the errors in the Windows system event log.
Exact text of error message:
File System Filter 'iaStorAfs' (Version 10.0, 2017-03-17T07:32:40.000000000Z) failed to attach to volume '\Device\Harddisk2\DR2'. The filter returned a non-standard final status of 0xC000000D. This filter and/or its supporting applications should handle this condition. If this condition persists, contact the vendor.
The errors are repeated hundreds of times with the only differences being which volume that it failed to attached to.
'\Device\Harddisk1\DR1'
'\Device\Harddisk2\DR2'
'\Device\Harddisk1\DR1'.
'\Device\Harddisk3\DR3'
...
...
...etc.
My system also contains 2 regular old SATA drives and 1 Samsung 500GB SSD (sata mode).
Like I said the errors only appear after successfully enabling optane.
Any thoughts on what's going on???