Hi there,
- I have lost my 2 raid 0 drives, which were my booting drive for Windows.
Asus P8Z77-I Deluxe /Z77 chipset
2x Intel 520 Series SSD 240 GB
It happened to me while I was plugging into my pc another drive to check his content and by mistake -while shut down, one of my data cable to 1 of my ssd raid 0 got unplugged.
Now after shutting down and replugging it in, they don't show anymore in my raid config, but just as non-raid when starting up.
Disk 0 - INTEL SSDSC2CW240A \\.\PhysicalDrive0
Disk 2 - INTEL SSDSC2CW240A \\.\PhysicalDrive2
They show now in this order because I have now hooked up an extra HD (in IDE)to run Windows and testing disk programs.Here is my config:
Asus P8Z77-I Deluxe /Z77 chipset
2x Intel 520 Series SSD 240 GB
What do you suggest I should do a as my next step so to make my ssd bookable again and run like before without having to delete them...?
Troubleshooting I did before is to change the boot sequence, unplug cables to 1 of ssd...and so on but no matter what my disk always show as non raid...